What will it cost?
Get a planning range for your project before requesting contractor prices.
A BETTER PREPARED HOMEOWNER
Roofing
project guides.
Understand the cost, decide what work you need, and take the next step toward actual contractor quotes.
START WITH YOUR QUESTION
Where are you in the decision?
You can start anywhere. Pick the question you need answered next.
Repair or replace?
Start with the condition, the proposed fix and the work a replacement would involve.
Which options fit?
Understand the equipment, materials or installation choices that change the scope.
Ready for actual quotes?
A planning range is the starting point. Share your project details to request contact about contractor quotes.
No obligation to buy. Provider availability varies. You choose whether providers may contact you.All Roofing guides
Browse A–Z, or search for a specific question.
68 guides
Roofing
A cold-weather reroof needs a weather plan
Ask the installer how manufacturer temperature guidance affects scheduling, handling, and follow-up for the selected shingles.
Read the guideRoofing
A roof meeting a wall: ask where the water exits
Use a roof-to-wall junction sketch to clarify kickout flashing, siding access, and repair responsibility.
Read the guideRoofing
A roof wind rating is not a local weather guarantee
Ask what a wind-test classification measures and how the proposed roof assembly is specified for your property.
Read the guideRoofing
After a storm, make a roof record from the ground
Organize dated observations for a professional roof assessment while keeping damage findings separate from insurance decisions.
Read the guideRoofing
Austin roof replacement: check the WUI exception
Distinguish roof covering, roof-deck work and the Austin Wildland-Urban Interface exception before comparing reroofing proposals.
Read the guideRoofing
Before ordering a replacement skylight, verify the fit
Collect the existing model and have the installer verify mounting, dimensions, slope, and flashing compatibility.
Read the guideRoofing
Can the old asphalt shingles be recycled? Ask before tear-off
Arrange a documented disposal or recycling destination before roofing debris is mixed and hauled away.
Read the guideRoofing
Chicago reroofing: keep the permit and contractor aligned
Organize the project records when the contractor named for a roofing job changes.
Read the guideRoofing
Choose a tile roof profile that fits the whole roof
Compare flat, curved, and textured tile appearances while identifying the exact clay or concrete product and matching accessories.
Read the guideRoofing
Choose roof color with a labeled physical sample
Use a repeatable sample review to compare roof colors against the exterior materials that will stay.
Read the guideRoofing
Choosing a cool roof without assuming energy savings
Compare reflectance, product suitability and the extra project cost before treating a cooler roof as a guaranteed bill reduction.
Read the guideRoofing
Compare roofing quotes: a roof replacement scope checklist
Compare roof bids beyond the total: measured area, tear-off, flashing, decking repair prices, ventilation, cleanup and warranties. Work through a sample difference.
Read the guideRoofing
Considering natural slate? Set the structural question first
Separate the appearance of slate from a decision to install natural stone, including structural review and future service access.
Read the guideRoofing
Considering roof tile in a freezing climate
Ask for product qualification and the appropriate installation guidance before choosing a tile roof for cold-weather exposure.
Read the guideRoofing
Curling or buckling shingles: describe the pattern
Prepare a location-based record of uneven shingles for professional assessment without flattening or repairing them yourself.
Read the guideRoofing
Dallas landmark roofs: approve the color decision first
Prepare the roof material and color information needed to discuss routine-maintenance versus broader landmark review.
Read the guideRoofing
Fort Worth roofing: when the deck changes the permit question
Plan for the point where shingle work becomes decking or structural roof work under Fort Worth’s published guidance.
Read the guideRoofing
Granules in a gutter: what to record for the roofer
Give a roofing professional context for observed granules without treating a handful of particles as a replacement diagnosis.
Read the guideRoofing
Hot-weather reroofing: plan delivery and roof traffic
Discuss material handling and access during a hot-weather project, including visits by other trades.
Read the guideRoofing
How to compare roof warranties before signing
Record who backs the warranty, what work it covers and which exclusions or transfer conditions need a written answer.
Read the guideRoofing
Impact-rated shingles: compare the test behind the label
Distinguish a laboratory classification from broader hail performance and document the exact shingle product under discussion.
Read the guideRoofing
Is the existing roof a candidate for a coating?
Ask for moisture and adhesion assessment before treating a coating proposal as an alternative to roof replacement.
Read the guideRoofing
Keep, reflash, or replace a skylight during reroofing?
Make an explicit skylight decision while the surrounding roof work is being planned.
Read the guideRoofing
Los Angeles reroofing: name the hauler and receiving facility
Connect a roofing debris allowance to the permitted hauling and certified processing route used in the City of Los Angeles.
Read the guideRoofing
Metal roof accessories: check what touches the panels
Ask the installer to review neighboring metals, equipment runoff, and accessories before adding or replacing metal roofing.
Read the guideRoofing
Metal roof finish: separate fading from roof performance
Compare coating documentation for color change and chalking without assuming the finish warranty covers the entire roof.
Read the guideRoofing
Metal roof quotes: standing seam and exposed fasteners
Identify the panel system, attachment details and maintenance documents before treating two metal-roof bids as equivalent.
Read the guideRoofing
Metal roof waviness: agree on appearance before ordering
Discuss visible panel waviness, texture choices, and sample expectations before committing to a metal roof.
Read the guideRoofing
Miami roofing: match the product approval to the order
Connect the selected roof products to the approval documents used in a City of Miami roofing application.
Read the guideRoofing
Moss on the roof: get the growth identified first
Prepare a useful moss-assessment brief and ask for a roof-compatible cleaning plan instead of selecting a treatment from appearance alone.
Read the guideRoofing
Open or closed roof valleys: document the chosen detail
Understand the visible difference between valley styles and ask the roofer to identify the detail intended for your shingles.
Read the guideRoofing
Philadelphia reroofing: plan the certification at closeout
Assign responsibility for the Roof Replacement Certification before the final inspection stage.
Read the guideRoofing
Phoenix: changing an asphalt roof to tile
Treat a roof-material conversion as a different planning question from replacing the same covering.
Read the guideRoofing
Pipe boots: identify the pipe before choosing the flashing
Ask the roofer to match a pipe-boot product to the actual pipe, roof covering, and slope.
Read the guideRoofing
Plan snow retention around entrances and lower roofs
Identify the places below a metal roof that matter to your household and ask for a designed snow-retention proposal.
Read the guideRoofing
Planning a FORTIFIED Roof: involve the evaluator early
Coordinate roof work with the evaluation and documentation needed for a FORTIFIED designation.
Read the guideRoofing
Portland reroofing: check the exceptions before assuming no permit
Identify the building type, wildfire designation, and proposed solar roofing before selecting a permit route.
Read the guideRoofing
Portland reroofing: preserve the stormwater connection
Check existing stormwater records before a roof or gutter project changes downspouts or drainage piping.
Read the guideRoofing
Recurring ice at the eaves: plan a whole-assembly review
Document where ice forms and ask the project team to evaluate roof and attic conditions before selecting a reroofing add-on.
Read the guideRoofing
Replacing a roof beneath existing solar panels
Coordinate the roofing and solar scopes before deciding whether existing panels should return to the roof.
Read the guideRoofing
Reroofing around a bathroom exhaust outlet
Confirm that the roof opening and the indoor exhaust route have a clear owner when roofing work touches a bathroom vent.
Read the guideRoofing
Reroofing with existing gutters: assign the edge connection
Clarify who handles the roof edge when the roofer and gutter contractor have separate scopes.
Read the guideRoofing
Ridge and hip caps belong in the roof selection
Compare the finishing shingles at roof peaks and hips as part of the complete appearance and product schedule.
Read the guideRoofing
Roof area vs. house square footage: pitch and measurements
Compare house floor area, roof footprint and sloped roof area. Follow a 1,000-square-foot, 6:12-pitch example before estimating replacement costs.
Read the guideRoofing
Roof area, squares and waste: reconcile the quantities in a bid
Keep measured roof surface, material allowance and ordered bundles separate so you can compare roofing proposals without counting an allowance twice.
Read the guideRoofing
Roof decking repairs: agree on the change-order method first
Prepare a written method for hidden decking repairs, including quantities, documentation and approval during a roof replacement.
Read the guideRoofing
Roof flashing: which pieces will the roofer replace?
Use a location-by-location list to clarify metal flashing replacement, proposed reuse and the decision process if removal reveals damage.
Read the guideRoofing
Roof leak or attic condensation? Keep the evidence open
Record when moisture appears and ask the professional to assess both exterior water entry and interior moisture pathways.
Read the guideRoofing
Roof repair or replacement: questions for the inspection
Turn an inspection into a comparison of the problem, proposed repair boundaries and replacement scope, without diagnosing a roof from age alone.
Read the guideRoofing
Roof tear-off or overlay: compare what the work will expose
Ask how existing layers, roof condition and deck inspection affect a reroofing proposal before comparing the headline totals.
Read the guideRoofing
Roof underlayment and leak barriers: ask where each goes
Make the layers beneath the shingles understandable by asking for the products, locations and installation requirements in your roofing scope.
Read the guideRoofing
Roof ventilation in a replacement quote: ask about the whole attic
Compare the intake and exhaust plan for a vented attic instead of treating a ridge vent as the entire ventilation scope.
Read the guideRoofing
Roofing contracts: connect each payment to a written milestone
Organize the roofing scope, payment schedule and change process before accepting a proposal or financing offer.
Read the guideRoofing
Sacramento reroofing: prepare the inspection access handoff
Confirm whether someone must attend and arrange safe professional access before a reroof inspection.
Read the guideRoofing
Saint Paul reroofing: contact the inspector before starting
Build the city’s early inspector contact into the roofing schedule so flashing and underlayment review is coordinated.
Read the guideRoofing
San Diego reroofing: plan for the deck decision
Prepare a San Diego reroofing change-order process that separates roof covering from concealed deck work and property-specific review.
Read the guideRoofing
San José reroofing: include the alarm affidavit in closeout
Plan the smoke and carbon-monoxide alarm verification record associated with a reroof permit that does not require an interior inspection.
Read the guideRoofing
Standing water on a low-slope roof: make a useful record
Document visible drainage concerns for a professional assessment without attempting to clear or alter roof drains yourself.
Read the guideRoofing
Tapered insulation: ask for the drainage plan
Understand a proposed tapered insulation package through its intended water paths and constraints, rather than a single thickness.
Read the guideRoofing
Three-tab, architectural, or designer shingles?
Choose an asphalt shingle profile by comparing its actual appearance and project specification before ordering.
Read the guideRoofing
TPO, PVC, or EPDM: ask for the complete roof system
Turn a low-slope membrane acronym into a comparable specification with attachment, layers, and project documents.
Read the guideRoofing
Tucson reroofing with a new skylight or vent
Separate a new roof opening from surface replacement when planning a Tucson roof project.
Read the guideRoofing
Water behind a chimney: ask about the roof cricket
Recognize the purpose of a chimney saddle and request a documented drainage assessment before reroofing.
Read the guideRoofing
What are starter shingles doing at the roof edge?
Recognize starter strips as a separate component and ask the installer to identify the product included in your roof.
Read the guideRoofing
What belongs in a self-adhering roll-roof proposal?
Identify the base, cap, primer, and related components in a low-slope roofing system without treating one roll as the entire roof.
Read the guideRoofing
When a porch roof needs a different roofing system
Plan a low-slope porch or addition as its own roof section and clarify the transition to the main roof.
Read the guideRoofing
Where will roof water go after a gutter project?
Map downspout destinations and ask the project team to evaluate the whole runoff path.
Read the guideRoofing
Why a low-slope roof proposal may include a cover board
Identify the role and exact product of a cover board and ask what changes if it is omitted from an alternate roof assembly.
Read the guide